The black Athens TCS212B Dual 12" Band Pass Subwoofer from Turbosound is a 3,200W high performance dual 12" subwoofer system that is ideally suited for a wide range of speech and music sound reinforcement applications. Engineered to work in conjunction with Turbosound loudspeaker management systems, the TCS212B provides very high output, extended low-frequency performance from a compact enclosure. The dual-port band pass design ensures symmetrical high-velocity and low-turbulence airflow that yields reduced distortion both in the port and the drivers, which are loaded by identical compartments in a force-cancelling arrangement. Each of TCS212B's two high-excursion 12" low-frequency drivers utilize a specialized voice coil wound on both the inside and outside of the coil former for higher magnetic density, better heat dissipation, higher power-handling capacity, and improved efficiency. The subwoofer generates ample amounts of high-definition bass energy in a space-saving form factor, regardless of its position in the room. Finished in a highly durable semi-matte black paint, the cabinet is constructed from 0.6" (15.0mm) birch plywood with integral M10 threaded rigging points. The rear connection plate carries a Neutrik speakON NL4 connector and a barrier strip connector for input and link connections to additional enclosures. Dual band pass subwoofer for installation applications 800W continuous, 3,200W peak power High-excursion 12" low-frequency drivers with inside/outside wound coils Low-distortion dual-port design for maximum sound pressure level 0.6" (15.0mm) birch plywood enclosure with hard-wearing semi-matte black paint finish Integral M10 rigging points for ease of installation Neutrik speakON NL4 and barrier strip connectors Turbosound TCS212B Specs Frequency Response 38 - 200 Hz @ ±3 dB 32 - 200 Hz @ -10 dB Nominal Dispersion Half space Power Handling Continuous: 800 W Peak: 3200 W Sensitivity 100 dB, 1 W @ 1 m Maximum SPL Continuous: 129 dB Peak: 135 dB Impedance 4 Ohms Components 2 x 12" (316 mm) LF driver Connectors 1 x Neutrik speakON NL4 1 x barrier strip terminals Construction 0.6" (15.0 mm) birch plywood Finish Semi-matte paint Grille Powder-coated perforated steel Hardware Flying Hardware: 16 x M10 Dimensions 16.5 x 39.4 x 18.5" (41.9 x 100.1 x 47.0 cm) Weight 99.6 lb (45.2 kg)